当前位置:返回首页 > 新闻资讯 > 常见问题 >
新闻中心
电话:13605413887(苏经理)
邮箱:1120779656@qq.com
联系人:苏经理
手机:13181713577(王经理)
网址:http://www.jngdhb.com
地址:济南市章丘区刁镇工业开发区

除尘器骨架的选择标准有哪些?

来源:http://www.jngdhb.com/   发布时间:2019-04-26 19:12:49
众所周知除尘器骨架是除尘器布袋的肋骨,除尘器骨架所祈祷的作用就是将除尘器的内部支撑起来,方便固定,预防除尘布袋在使用时出现凹陷的现象,滤袋凹陷会使除尘设备的除尘效果大打折扣,如果可以说除尘滤袋是整个除尘器的心脏,那么除尘骨架就是除尘器布袋的脊柱,因而只有选择合适的除尘器骨架及配套的除尘器设备,才能是除尘器的作用发挥到zuida,因此,广大的新老客户朋友们在选择除尘器骨架的时候,下面请给大家介绍几项:
  It is well known that the framework of the dust collector is the rib of the bag of the dust collector. The function of the framework of the dust collector prays is to support the inside of the dust collector, to fix it conveniently, to prevent the hollowing of the bag of dust collector when it is used. The hollowing of the bag will greatly reduce the dust removal effect of the dust collector. If it can be said that the bag of dust collector is the heart of the whole dust collector, then the framework of the dust collector is the dust removal. Because of the spine of the bag, only by choosing the appropriate dust collector skeleton and the supporting dust collector equipment can the function of the dust collector be brought into full play to zuida. Therefore, when choosing the dust collector skeleton, the majority of new and old customers and friends will introduce several items below:
  a、除尘器骨架需要有足够的刚度和强度,要能承受布袋在工作时所承受的压力。
  A. Dust collector skeleton needs enough stiffness and strength to withstand the pressure of the cloth bag when working.
  b、需要各个环与筋骨分布均匀,能防止正常的碰撞、冲击等造成的骨架变形。
  B. It is necessary to distribute the rings and ribs evenly so as to prevent the skeleton deformation caused by normal collision and impact.
  c、除尘器骨架的每个焊点都必须要牢固,一旦有脱焊、虚焊现象导致骨架开焊变形,会引起布袋松垮脱落或堵塞等情况。
  C. Every solder joint of the dust collector skeleton must be firm. Once there is a phenomenon of off-welding and virtual welding, the skeleton will be deformed, which will lead to loosening, falling off or blockage of the cloth bag.
  d、除尘器骨架的外表面要光滑,如果有毛刺或凹凸不平的地方,可能使布袋在使用过程中因压力的不断变换而磨损过快。
  D. The outer surface of the dust collector skeleton should be smooth. If there are burrs or bumps, it may cause the bag to wear too fast because of the constant change of pressure in the use process.
  除尘器骨架需要有足够的刚度及强度,要能承受布袋在工作是所承受的压力。
  The dust collector skeleton should have enough stiffness and strength to withstand the pressure of the cloth bag when it works.
光氧催化设备
  需要各个环与筋骨分布均匀,能防止正常的碰撞、冲击等造成的骨架变形。
  It is necessary to distribute the rings and ribs evenly so as to prevent the skeleton deformation caused by normal collision and impact.
  除尘器骨架的每个焊点都必须要牢固。一旦有脱焊、虚焊现象导致 骨架开焊变形,会引起布袋松垮脱落或堵塞等情况。
  Every solder joint of the dust collector skeleton must be firm. Once the phenomenon of off-welding and virtual welding leads to the deformation of the skeleton open-welding, it will cause loosening, falling off or blockage of the cloth bag.
  除尘器骨架的外表面要光滑,如果有毛刺或凹凸不平的地方,可能是布袋在使用过程中因压力的不断变化而磨损过快。
  The outer surface of the dust collector skeleton should be smooth. If there are burrs or bumps, it may be that the bag wears too fast due to the constant change of pressure in the use process.
  除尘骨架表面除了要光滑外,还要做防腐蚀、耐高温等处理,这种处理就是要根据根据要用在什么类型的行业中来做决定的。
  Besides being smooth, the surface of dust skeleton should also be treated with anticorrosion and high temperature resistance, which is decided according to the type of industry to be used.
相关标签: 光氧催化设备、
  • 光氧催化废气处理设备 利用特制的高能高臭氧UV紫外线光束照射废气,裂解工业废气如:氨、...
  • 光氧废气净化器原理 光氧废气净化器的工作机理是采用微波场激发无极灯,从而产生高强的...
  • 布袋除尘器的除尘效果 除尘器或除尘设备就是把粉尘从烟气中分离出来的设备。而布袋除尘器...
  • 光氧催化净化器设备的处... 有机光氧催化设备的原理有活性炭吸附法、催化燃烧法、催化氧化法、...