当前位置:返回首页 > 新闻资讯 > 公司动态 >
新闻中心
电话:13605413887(苏经理)
邮箱:1120779656@qq.com
联系人:苏经理
手机:13181713577(王经理)
网址:http://www.jngdhb.com
地址:济南市章丘区刁镇工业开发区

uv光氧催化设备使用时的注意事项!

来源:http://www.jngdhb.com/   发布时间:2019-04-18 11:17:13
  运用UV光氧催化设备的进程中有很多的问题需求留意,假设不留意的话会使设备发作缺点等,不能正常的运转,为厂家构成不用要的丧失,假设能做到严加留意能够避免设备呈现缺点,为你引见一下运用UV光氧催化设备进程中的留意事项:
  There are many problems in the process of using UV photocatalytic equipment. If you don't pay attention to them, it will make the equipment break out shortcomings, etc. It will not work properly and make unnecessary loss for the manufacturer. If you can pay close attention to it, you can avoid the shortcomings of the equipment. Here are some points for attention in the process of using UV photocatalytic equipment:
  1、设备前要保证留出设备的检修以及维护空间。设备应该在顶部装设防雨方法,设备长时间的运转必定会有损坏,假设不留出检修的空间,到时分得把设备全部拆开,而这个工作量仍是比拟大的。
  1. Make sure that there is room for overhaul and maintenance before the equipment. Equipment should be equipped with rainproof methods on the top, equipment will be damaged if it runs for a long time. Assuming that there is no room for overhaul, it is necessary to dismantle all the equipment at that time, and the workload is still comparatively large.
  2、设备时要做好放电接地。由于UV光氧净化器也属于高压设备,所以应该在运转维护或许设备检修时都做好防电击方法。
  2. Discharge grounding should be done well when equipments are used. Because the UV photooxygen purifier belongs to high-pressure equipment, it is necessary to do a good job in operation and maintenance or equipment overhaul to prevent electric shock.
光氧催化设备
  3、应该在风机的前段设备风量操控设备,大局部厂家都会采用风机变频器或许空气操控阀来调理风量,企图是让光氧废气净化器的处置优势发挥到大,进入设备的风量应该是安稳的,保证风量平稳过渡,假设风量时大时小,不只废气处置作用欠安,而且对除臭设备也会构成必定的影响。
  3. Should be in front of the wind turbine equipment air volume control equipment, most manufacturers will use fan frequency converter or air control valve to regulate the air volume, in an attempt to make the disposal advantage of the photo-oxygen exhaust gas purifier play a large role, the air volume into the equipment should be stable, to ensure a smooth transition of air volume, assuming that the air volume is large and small, not only the waste gas disposal is not safe, but also the deodorization equipment. It will also have a definite impact.
  4、保证传输进程顺畅。进入光解废气净化器的管段应该光滑,而且要有一段直管,保证废气进入设备的时分能够构成安稳的恒流,运用的传输管道是用金属软管衔接,以保证发作小的震动作用。
  4. Ensure smooth transmission. The pipe section entering the photolysis waste gas purifier should be smooth and straight, so as to ensure that the steady constant current can be formed when the waste gas enters the equipment. The transmission pipeline used is connected with a metal hose to ensure the small vibration.
相关标签: 光氧催化设备、
  • 低温等离子体处理恶臭废气 介绍了低温等离子体对电子企业产生的恶臭气体的治理,该装置对恶臭浓...
  • UV光解除臭设备的原理 V光解除臭设备的原理是利用特制的高能高臭氧UV紫外线光束对废气进行...
  • UV光氧催化净化设备需要... 在国家政策面前所有的调整都是为了全民的利益能够得到好的保障而制...
  • 光氧催化设备的工作原理 光氧催化设备在光照下,如果光子的能量大于半导体禁带宽度,其价带...